devices.esphome.io

Wyze Plug (2021)

Wyze Plug (2021)

Device Type: plug
Electrical Standard: us
Board: esp32

Initial Install

This device is glued together pretty tightly, but can be opened with the application of hot air and prying. It must be opened for the first upload.

GPIO Pinout

There are multiple versions of this device, all nominally using the WLPP1 base model number. An earlier version may use these GPIOs:

PinFunction
GPIO15Button
GPIO16Relay
GPIO19Relay LED

A current device purchased in late 2023 has a model number of WLPP1CFH, which uses a ESP32C3 variant, and uses GPIOs:

PinFunction
GPIO10Button
GPIO0Relay
GPIO1Relay LED

Basic Configuration

# Basic Config
substitutions:
  display_name: WyzePlug


esphome:
  name: wyzeplug
  platform: ESP32
  board: esp-wrover-kit
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
logger:
api:
ota:


# Device Specific Config
switch:
  - platform: gpio
    name: ${display_name} Relay
    pin:
      number: GPIO16
      inverted: false
    id: relay
    on_turn_on:
      - light.turn_on: relay_led
    on_turn_off:
      - light.turn_off: relay_led
  - platform: restart
    name: ${display_name} Restart


output:
  - platform: gpio
    pin: GPIO19
    inverted: True
    id: relay_led_gpio


light:
  - platform: binary
    name: "Relay LED"
    id: relay_led
    internal: true
    output: relay_led_gpio


binary_sensor:
  - platform: gpio
    internal: true
    pin:
      number: GPIO15
      mode: INPUT_PULLDOWN
      inverted: True
    name: ${display_name} Button
    on_press:
      - switch.toggle: relay
Edit this page on GitHub

On this page